Rotary Table for Special-purpose Machines

HOME > Product > Rotary Table for Special-purpose Machines

PIC-400
PIC-500
PIC-630

Rotary Table for Special-purpose Machines

  • Minimum indexing 1o or 5o.
  • Table is available upon request.
  • Built-in oil distributor (8+1P) is avaulable.(8 holes and one water drain hole)(optional)
  • Employs three-piece gear design for heavy cutting application.
PRC-400
PRC-500
PRC-630

Rotary Table for Special-purpose Machines

  • Minimum indexing 0.001o
  • Table is available upon request.
  • Built-in oil distributor (8+1P) is avaulable.(8 holes and one water drain hole)(optional)

Drawing PIC-400

Drawing PIC-500

Drawing PIC-630

Specifictions

Unit:mm
Model PIC-400 PIC-500 PIC-630
Worktable diameter Ø 400 Ø 500 Ø 630
Center bore diameter Ø 14 Ø 14 Ø 14 (without Oil Separator hole Ø 175)
Load capacity 500 kg (Dynamic load) 600 kg (Dynamic load) 800 kg (Dynamic load)
2000 kg (Static load) 2400 kg (Static load) 2500 kg (Static load)
Servomotor FANUC α 12i FANUC α 12i FANUC α 22i
Teeth ratio 1:45 1:90 1:180
Minimum input increment 1o 1o 1o
Motor speed 2000 rpm/min 2000 rpm/min 2000 rpm/min
Max. table speed 44.4 r.p.m/min 22.2 r.p.m/min 11.1 r.p.m/min
Hydraulic pressure 35 kgf/cm2 35 kgf/cm2 35 kgf/cm2
Clamping force 3500 kg 5500 kg 4500 kg
Indexing accuracy กำ5" (every 5o) กำ5" (every 5o) กำ5" (every 5o)
Repeatability กำ1" กำ1" กำ1"
Top & bottom faces flatness 0.02 mm 0.02 mm 0.02 mm
Top face rotation runout 0.02 mm 0.02 mm 0.02 mm
NOTE : Specifications may be changed to meet customer's requirement.

Drawing PRC-400

Drawing PRC-500

Drawing PRC-630

Specifictions

Unit:mm
Model PRC-400 PRC-500 PRC-630
Worktable diameter Ø 400 Ø 500 Ø 630
Center bore diameter Ø 14 Ø 14 Ø 14 (without Oil Separator hole Ø 175)
Load capacity 500 kg (Dynamic load) 600 kg (Dynamic load) 800 kg (Dynamic load)
2400 kg (Static load) 2500 kg (Static load)
Servomotor FANUC α 12i FANUC α 12i FANUC α 22i
Teeth ratio 1:45 1:90 1:180
Minimum input increment 0.001o 0.001o 0.001o
Motor speed 2000 rpm/min 2000 rpm/min 2000 rpm/min
Max. table speed 44.4 r.p.m/min 22.2 r.p.m/min 11.1 r.p.m/min
Hydraulic pressure 35 kgf/cm2 35 kgf/cm2 35 kgf/cm2
Clamping force 180 kgf-m 250 kgf-m 450 kgf-m
Indexing accuracy 20" (กำ5"with angle encoder) 20" (กำ5"with angle encoder) 20" (กำ5"with angle encoder)
Repeatability 4" 4" 4"
NOTE : Specifications may be changed to meet customer's requirement.