SPECIFICATIONS----Model |
TRNC-170 |
| Worktable diameter |
Ø170mm |
| Table height(horizontal position) |
264.5mm |
| Overall height(vertical position) |
388.5mm |
| Table center height(vertical
position) |
198.5mm |
| Center bore diameter |
Ø35H7 mm |
| Spindle hole diameter |
Ø35 mm |
| Width of T-slot |
12H7 mm |
| Width of Guide-block |
18h7 mm |
| Servo motor (FANUC) |
Rotary |
Inclination |
| Ø3/3000 |
Ø3/3000 |
| Servo motor(mitsubishi) |
HA-33NC |
HA-33NC |
| Total seed reduction ratio |
1:90 |
1:120 |
| Minimum input increment |
0.001o |
| Table rotation speed |
33.3r.p.m |
25r.p.m |
| load capacity |
0 tilting angle |
50kg |
| 0 ~90 tilting angle |
35kg |
| Allowable turntable torque |
15kg.m |
| Max.diameter of workpiece |
170mm |
| Clamping torque(pneumatic pressure
5kg/cm) |
16kg.m |
| Rotation axis |
indexing accuracy |
20" |
| repeatability |
4" |
| Inclination axis |
indexing accuracy |
60" |
| repeatability |
4" |
| tilting angle |
- 20o ~ +140o |
| Net weight |
150kg |
