SPECIFICATIONS----Model |
TRNC-125 |
| Worktable diameter |
Ø125mm |
| Table height(horizontal position) |
236mm |
| Overall height(vertical position) |
260mm |
| Table center height(vertical
position) |
150mm |
| Center bore diameter |
Ø25H7 mm |
| Spindle hole diameter |
Ø25 mm |
| Width of T-slot |
12H7 mm |
| Width of Guide-block |
14h7 mm |
| Servo motor (FANUC) |
Rotary |
Inclination |
| Ø2/3000 |
Ø2/3000 |
| Servo motor(mitsubishi) |
HA-33NT |
HA-33NT |
| Total seed reduction ratio |
1:90 |
1:180 |
| Minimum input increment |
0.001o |
| Table rotation speed |
33.3r.p.m |
16.6r.p.m |
| load capacity |
0 tilting angle |
50kg |
| 0 ~90 tilting angle |
35kg |
| Allowable turntable torque |
8kg.m |
| Max.diameter of workpiece |
125mm |
| Clamping torque(pneumatic pressure
5kg/cm) |
8.5kg.m |
12kg.m |
| Rotation axis |
indexing accuracy |
40" |
| repeatability |
4" |
| Inclination axis |
indexing accuracy |
60" |
| repeatability |
4" |
| tilting angle |
- 40o ~ +120o |
| Net weight |
140kg |
